0

Toyota

3rd Gen 4Runner Panhard Drop Bracket

$250.00

Get rid of that rear end wiggle!

4Runner

3rd Gen 4Runner Panhard Drop Bracket

$250.00

Get rid of that rear end wiggle!

Features

FREE SHIPPING LOWER 48

The 4Runner Panhard Drop Bracket brings the same idea as our FJ80 Panhard Lift Bracket to the Toyota 4Runner. A popular suspension lift option for ‘96-’02 4Runners is to swap the rear coil springs with the stock front springs from a ‘91-’97 FJ80. This nets about 4” of lift in the rear, which works quite well with a long-travel front suspension kit.

When lifting the rear 4”, your panhard geometry is altered to the point of being almost unusable/dangerous.

In an ideal world, your panhard bar will be near flat at normal ride height. This allows up/down axle travel without introducing any side-to-side movement. Our bracket will get your geometry back to this nearly flat ideal!

Installation Instructions

Download

Specs

  • 14 lbs
  • Drops chassis side of panhard 3"

Fit

  • 1996-2002 4Runner

Fabrication

  • CNC lazer cut
  • CNC bent
  • Fully MIG welded
  • Powdercoated semi-gloss black

Frequently Asked Questions